https://c1.staticflickr.com/9/8584/30021739366_094646f2ae_b.jpg https://c1.staticflickr.com/9/8538/30021739226_4c12098dd7_b.jpg https://c1.staticflickr.com/9/8827/29429177993_763a2c77d5_b.jpg This is the most challenge during transport. "client copy uests do not match the component version of the target system" ================== This was due to the client was exported from IDES system which has much lower patch level than the freshly installed EHP7 ------------------ To resolve this error, we'll have to carry out a parameter within the transport domain ------------------ https://c2.staticflickr.com/6/5204/29429249613_7586487ab8_b.jpg Now import starts ------------------ https://c1.staticflickr.com/9/8270/29942416532_cf827b4933_b.jpg

Due to component patch level different between source and target client, so we're execting errors would occur ------------------ https://c1.staticflickr.com/9/8130/30029508946_17437be13c_b.jpg https://c1.staticflickr.com/9/8122/30030420916_1e43ff7e6f_b.jpg https://c2.staticflickr.com/6/5003/29770411120_99934bef75_b.jpg https://c2.staticflickr.com/6/5019/29770411040_7c31efb8d5_b.jpg https://c1.staticflickr.com/9/8547/30030420666_0ebbe520d1_o.jpg

So obviously the failure was caused by the components from source system/client (IDES) not exist in target system/client (new system). When we look into the installed components between two systems, the gap was huge. IDES has way more components installed. ================== https://c1.staticflickr.com/9/8056/29770410950_b8eeb36045_b.jpg https://c2.staticflickr.com/6/5639/29951133532_bb08b286d5_b.jpg https://c1.staticflickr.com/9/8049/29951133872_e401200757_b.jpg https://c1.staticflickr.com/9/8555/29951133642_334accdab1_b.jpg